TPMS Product Series

8153043

Auto Duplicate

Press and hold the power key to power on the device

  • During power on,The device display the CUB logo.

  • Software revision number follows after the CUB logo.

  • Now the device is at the maker selection menu

Use arrow key to scroll up and down between maker

  • Maker selection: Use the arrow key to browse alphabets of car-makers, press the -Enter- key to select

  • Maker selection: Use the arrow key to browse automakers, press the -Enter- key to select

  • Model Selection: Use the arrow key to browse models, press the -Enter- key to select

This function is designed for you to bypass OBD II and automatically. duplicate an O.E Sensor.

  • Maker selection: Use the arrow key to select year and frequency and press the -Enter- key to select

  • Function selection: Use the arrow key to select new sensor and press the -Enter- key to select

  • Function selection: Use the arrow key to select auto duplicate and press the -Enter- key to select

NOTE - Duplicate and Program function will only work with CUB's Uni-sensor and Uni-sensor only.

  • Search ID Process: Sensor AID will now search the sensor ID, sensor respond time may vary depending on snesor type and brand. Sensor AID will beep after receving sensor information

  • Duplicate Sensor: Sensor AID will now display the O.E sensor ID, press the -Enter- key to program Uni-sensor. Note: Once you get the sensor ID, press Enter key directly to program the new sensor. If you press Esc key, thesensor ID will be erased, you need to diagnose again.

  • Duplicate Complete: Sensor AID will now duplicate the sensor for you, following by Erasing Flash, Program sensor and Verifying, you will hear 2 short beeps when the sensor is duplicated. Note: Duplicate and Program function will only work with CUB's Uni-sensor and Uni-sensor only.