TPMS产品系列

8153043

OBD II 功能

Press and hold the power key to power on the device

  • During power on,The device display the CUB logo.

  • Software revision number follows after the CUB logo.

  • Now the device is at the maker selection menu

Relearn the vehicle with OBDII. This function require OBDII cable.

  • Maker selection: Use the arrow key tobrowse alphabets of carmakers, and press the -Enter- key to select.

  • Maker selection: Use the arrow key to browse automakers, and press the -Enter- key to select.

  • Model selection: Use the arrow key to browse models, and press the -Enter- key to select.

--------------------------------------------------------------------------------------------------------------------------

  • Year selection: Use the arrow key to select year and press the -Enter- key to select.

  • Function selection: Use the arrow key to select OBD II and press the -Enter- key to select.

  • TPMS Data selection: Press the -Enter- key to delete previous stored TPMS data. Press the -Esc- key to keep previous stored TPMS data .

  • Diagnose sensor : Sensor AID will now activate the sensor. The respond time from the vehicle may vary depending on MMY. Sensor AID will beep after receiving sensor information.

  • Diagnose process: Press the -Enter- key to start diagnose. The flashing tire indicates the tire position. Start Diagnose sensor starting from LF,RF,RR and LR. Note: If the car is equipped with spare tire, spare tire must be daignosed and relearn with the vehicle.

  • OBD II connect: Insert OBD II module into the OBD II connector of the vehicle and turn on ignition by using the -Enter- key to start. The following screen will display.

  • Read Car ID: Use the arrow key to Select -Read Car ID- and press the -Enter- key to select.

  • Read Car ID process: Sensor AID is now starting the communication with the vehicle.

  • Read Car ID complete: After Sensor AID successfully extract IDs from the ECU, you will hear 2 short beeps.

  • Write Car ID: Use the arrow key to select -Write Car ID- and e press the -Enter- key to select.

  • Write Car ID process: CUB Sensor AID is now starting the communication with the vehicle. Then CUB Sensor AID is overwriting the sensor ID in the ECU.

  • Write Car ID complete: After CUB Sensor AID successfully overwrite the sensor ID to the ECU, you will hear 2 short beeps.